MDF and HDF · 1220 × 2440 mm · 9–25 mm
MDF / HDF Board
- Size 1220 × 2440 mm, 2100 × 2800 mm, 1250 × 2500 mm, 1830 × 3660 mm, or cut to size
- Thickness 2–30 mm
MDF-F67524
Get a Quote
Moisture-resistant MDF
1220x2440mm
SKU: MDF-67CA38
SGS tested
CE marked
ISO 9001
Specification
| Size | 1220 × 2440 mm and larger formats, or cut to size |
|---|---|
| Thickness | 2–30 mm |
| Core | Green-dyed moisture-resistant MDF — the dye marks the grade through the board |
| Behaviour | Resists moisture better than standard MDF; it is not waterproof |
| Edge | The cut edge is the weak point and must be sealed in a humid room |
| Machining | Machines and paints like standard MDF, so a profile can be routed normally |
| Use | Kitchens, bathrooms, utility rooms and other humid interiors |
| Glue line | MR / E0 / CARB P2 / E1 depending on the requirement |
What this product does
-
1
Green-dyed core
The grade is identifiable through the board, not from a label
-
2
Resists, not waterproof
It buys time in a humid room, and standing water still swells it
-
3
Edge is the weak point
Cut edges need sealing more than the faces do
-
4
Machines like standard MDF
Same tooling and same finish as the standard grade
Description
Moisture-resistant MDF with a green-dyed core, in 1220 × 2440 mm and larger formats from 2 mm to 30 mm. It machines and paints like standard MDF, so a profile can be routed normally without changing the tooling or the finish.
The grade is for kitchens, bathrooms, utility rooms and other humid interiors, and the dye in the core exists so the grade can be identified through the board rather than from a label — which matters when a delivery is being checked. What it is not is waterproof, and treating it as though it were is the usual way it fails: it resists moisture better than standard MDF and that buys time in a humid room, but water sitting on the surface or entering an unsealed edge will still swell it. The cut edge is the weak point, more than the faces, so every edge should be sealed in a kitchen or bathroom even though the core is treated. It is a substrate, not a finish: behind a properly tanked surface it does its job, as the waterproofing itself it does not. Specifying it throughout a building to be safe is paying a premium for a property the dry rooms will never use.
Confirm which rooms actually need the grade and the edge-sealing detail for each, and we will quote the moisture-resistant board only where it is doing work.
Where it is used
Kitchen carcasses
The room where steam and spills arrive together
Bathroom vanity units
A humid room, with the edge seal doing the real work
Utility and boot rooms
Damp that is routine rather than occasional
Laundry cupboards
Warm and humid, and usually the last place anyone details properly
Frequently asked
What is the minimum order?
1 × 20ft container, mixed across products where the mix suits the project. A sample box can be arranged before the first container.
Can I see a sample before ordering?
Yes. Send the product and the size you are specifying, and we will confirm the sample and the lead time for it.
Is moisture-resistant MDF waterproof?
No, and treating it as though it were is the most common way it fails. It resists moisture better than standard MDF, which buys time in a humid room, but it will still swell if water sits on it or gets into an unsealed edge.
Why is the core dyed green?
So the grade can be identified through the board rather than from a label. If you cut a panel and the core is not green, it is not the moisture-resistant grade, which matters when a delivery is being checked on site.
Do the edges still need sealing?
Yes, and more so than the faces. The cut edge is where water enters, so seal every edge in a kitchen or bathroom application even though the core resists moisture.
Can it be used as a shower wall substrate?
Only behind a properly tanked surface, not as the finish or as the waterproofing. Tank the wet zone and treat the board as a substrate.
Trade terms
- MOQ
- 1 × 20ft container
- Lead time
- 15-25 days
- Payment terms
- T/T 30% deposit, balance before shipment
Final packing, freight and loading plan are confirmed in writing on the order quotation.
Related products
All in this category
50 × 150 mm section · interior ceiling
Ventilated WPC Ceiling Tube 50 × 150 mm
- Section 50 × 150 mm, supplied made to order to the run length
- Weight class Heaviest tube in the range — the hanger carries the section, so it fixes back to structure
CEI-7F162E
Get a Quote
50 × 90 mm section · interior ceiling
Easy-install WPC Ceiling Tube 50 × 90 mm
- Section 50 × 90 mm, supplied made to order to the run length
- Install Easy-install detail — the profile seats onto its fixing in one movement
CEI-C7A5CE
Get a Quote
50 × 75 mm section · interior ceiling
Suspended WPC Ceiling Tube 50 × 75 mm
- Section 50 × 75 mm, supplied made to order to the run length
- Suspension Suspended detail — hangs on hangers below the slab rather than fixing tight to it
CEI-3408AF
Get a Quote
50 × 60 mm section · interior ceiling
WPC Ceiling Tube 50 × 60 mm
- Section 50 × 60 mm, supplied made to order to the run length
- Visual weight The narrow end of the 50 mm-deep family — the face that will not dominate a low room
CEI-2442D4
Get a Quote
40 × 45 mm section · interior ceiling
Rot-proof WPC Ceiling Tube 40 × 45 mm
- Section 40 × 45 mm, supplied made to order to the run length
- Rot Composite core does not rot — the fixings and any timber batten behind it are what fail
CEI-EA5AC5
Get a Quote
Technical reading
- 50+ Countries shipped to
- 2003 Established
- 20,000 m² factory area
- 20 Production lines
- 80 Employees
- 15 Product lines
- 5M m² annual capacity
Ask about this product
Tell us the size, the quantity and the destination port. We will come back with price, lead time and the packing plan.
- Reply within one business day
- No obligation, no account needed
- Drawings and specs stay confidential
Get My Quote
The product name and SKU are filled in for you.