Aluminium Composite UV Board
- Core Aluminium composite — a metal skin over a mineral-filled core
- Rigidity Flat and rigid without a heavy substrate behind it
UV-B0E7DD
Get a Quote
Marble, solid colour and wood-grain UV-cured faces on a rigid board, for wall, column and ceiling cladding.
Narrow it down
Products
Marble, solid colour and wood-grain surfaces
UV Board
- Surface UV-cured coating — a cured film, not a melamine paper overlay
- Face range Marble, solid colour and wood-grain faces
UV-E8325C
Get a Quote
Sizes we produce
| Parameter | Values |
|---|---|
| Core | Aluminium composite — a metal skin over a mineral-filled core |
| Rigidity | Flat and rigid without a heavy substrate behind it |
| Humidity | Unaffected by humidity — the reason it is used where MDF would move |
| Format | 1220 × 2440 mm (4 × 8 ft) and 1220 × 2800 mm, in 3 mm to 18 mm |
| Edge | A cut edge shows the composite core, so it takes a trim or an edge band · Cuts like a board, so a visible edge needs a band or a trim |
| Use | Interior wall linings, column casings and cabinet fronts |
| Standard | SGS tested. CE documentation supplied with EU-bound orders. |
| Surface | UV-cured coating — a cured film, not a melamine paper overlay |
| Face range | Marble, solid colour and wood-grain faces |
| Substrate | MDF, PVC or plywood under the coating; the substrate decides the weight and the edge |
| Limit | Interior only; a cut edge left unsealed will take up moisture |
Tolerances and densities vary by section profile. Send the drawing for the exact values on your order.
Related reading
Acoustic panel nrc rating explained: the complete guide for specifiers
If you are selecting acoustic panels for an office, studio, school, or commercial space, you have probably encountered the term NRC rating . But what does…
Read the guide
MDO Plywood vs Phenolic Plywood: An Engineer’s Comparison
In concrete formwork, MDO plywood and phenolic plywood are the two most common engineered panel choices. Both offer excellent concrete finish, but their composition, performance, and…
Read the guide
H20 Beam vs Solid Timber Beam for Concrete Formwork
In concrete formwork systems, the choice between H20 timber beams and solid timber beams is critical for project cost, speed, and quality. While both have been…
Read the guideOther categories
Need a spec sheet or sample for UV Board?
Tell us the profile, the length and the quantity. We will confirm what is in stock and what is made to order.