WPC Wall Panel
Grooved WPC profiles for interior and exterior walls. Seven sections from 84 to 410 mm, plus clip-on and durable variants.
View specs
Linyi Solland · Factory direct
WPC Wall Panels, SPC Flooring and Plywood from Our Own Factory
One supplier for wall, floor and formwork panels — factory direct, tested to SGS and CE standards, shipped to 50+ countries.
- SGS tested
- CE marked
- ISO 9001
- 50+ Countries shipped to
- 2003 Established
- 20,000 m² factory area
- 20 Production lines
- 80 Employees
- 15 Product lines
- 5M m² annual capacity
Decorative surfaces
Walls, floors and ceilings
Seven panel systems for interior and exterior finish. Each category lists the sizes we hold in stock and the standards the product is tested against.
All products
WPC Ceiling Beam
Hollow wood-plastic ceiling tubes for decorative beams and suspended runs. Nine sections from 25 × 50 to 50 × 150 mm.
View specs
SPC Flooring
Click-lock, loose-lay and self-adhesive rigid core planks, 4 to 6 mm, with IXPE pad and commercial wear options.
View specs
Acoustic Panel
PET, mineral wool and slatted panels, NRC 0.70 to 0.95 tested to ASTM C423. Chosen by rating, not by thickness.
View specs
UV Board
Marble, solid colour and wood-grain UV-cured faces on a rigid board, for wall, column and ceiling cladding.
View specs
Door Skin
PP, PET and wood-grain skins for interior doors, with fire-rated options matched to the door core.
View specs
PVC Ceiling
PVC, bamboo fibre, coffered and acoustic ceiling panels for bathrooms, corridors and wet areas.
View specsCatalogue
Products we ship every week
Standard sizes held in stock. Non-standard sections are made to order — send the drawing and we will confirm feasibility.
View all
169x24mm
3D Fluted WPC Wall Panel
- Section 169 × 24 mm, supplied made to order to the wall length
- Fluting Three-dimensional relief cut into the face to the full section depth — not a printed line
WPC-15ED72
Get a Quote
169x24mm
Solid Plain WPC Wall Panel
- Section 169 × 24 mm, flat face, supplied made to order to the wall length
- Face Unbroken — no groove line to hold dust and no pattern to line up
WPC-048221
Get a Quote
169x24mm
Co-extruded WPC Wall Panel
- Section 169 × 24 mm, co-extruded, supplied made to order to the wall length
- Skin A separate outer layer bonded during extrusion, not laminated on afterwards
WPC-B754FF
Get a Quote
169x24mm
Anti-mould Groove WPC Wall Panel
- Section 169 × 24 mm, grooved, supplied made to order to the wall length
- Compound Anti-mould additive carried in the compound, not applied as a surface coating
WPC-11FA10
Get a Quote
By application
Solutions
The same panel behaves differently depending on the substrate behind it and the room it sits in. These pages start from the application.
All solutions
Interior Wall Cladding
Interior cladding decisions come down to three things: whether the panel is flat or profiled, how it fixes to the substrate, and…
View application
Exterior Facade Cladding
Exterior cladding is a UV, thermal-cycling and fixing problem before it is an aesthetic one. Panels specified indoors will check and fade…
View application
Hotel & Hospitality Fit-out
Hospitality fit-out is a repeatability problem: hundreds of identical rooms, a tight programme, and a specification the operator can afford across the…
View applicationHow we work
What you can hold us to
Each point below is something we can put in writing on your order confirmation.
Our own production base
Cladding and panel lines run at Linyi Solland WPC Manufacturing Base. We are the exporter and the producer, so the same team that signs the order runs the line.
Checked against your spec sheet
Every order is verified against the specification you approved before cutting. Deviations are raised with you before production continues.
Test reports on request
SGS and third-party test reports are available per product and per batch. Ask for the report covering the model you are quoting.
Export packing and loading
Pallet, film and carton combinations are planned against your container type, so the loading plan is agreed before the goods are made.
Before you specify
Comparisons, with the numbers attached
Most competitor pages tell you a product is "better". These rows give the measurable difference and link to the full write-up.
| Specification point | Option A | Option B | Where the difference shows |
|---|---|---|---|
| Acoustic absorption (NRC) | PET felt 0.50–0.70 | Mineral wool 0.70–0.95 | NRC, ASTM C423 |
| Formwork panel reuse | MDO coated 8–15 turns | Phenolic faced 15–25 turns | Turnover before delamination |
| Formwork beam cost per m² of slab | H20 timber $10,600 | Solid timber $21,000 | Total installed cost |
Production base
Inside the Linyi works
Photographs from our own manufacturing base. We do not broker stock from other factories.
Factory page
Technical library
Guides for specifiers
Comparisons, grade definitions and installation notes — written for people who have to sign off on the order.
All guides
Acoustic panel nrc rating explained: the complete guide for specifiers
If you are selecting acoustic panels for an office, studio, school, or commercial space, you have probably encountered the term NRC rating . But what does…
Read the guide
MDO Plywood vs Phenolic Plywood: An Engineer’s Comparison
In concrete formwork, MDO plywood and phenolic plywood are the two most common engineered panel choices. Both offer excellent concrete finish, but their composition, performance, and…
Read the guide
H20 Beam vs Solid Timber Beam for Concrete Formwork
In concrete formwork systems, the choice between H20 timber beams and solid timber beams is critical for project cost, speed, and quality. While both have been…
Read the guideSend drawings or specs
Send a section drawing, a spreadsheet or just the sizes you need. We confirm feasibility, price and lead time in writing.
- We reply within one business day
- Your drawings stay confidential
- Samples ship by DHL or FedEx