Material solution

Plywood Solutions

One sheet family covering the form face, the structure behind the cladding, the furniture carcass and the export crate. What changes between them is the face grade, the core and the film — not the mill.

Send Drawings or Specs Browse the boards

1220×2440 mm standard sheet

9–25 mm thickness range

15–25 turns, phenolic faced

E0/E1 emission grades

What it does

Four jobs, one board family

The same mill runs all four. What you are choosing between is the face, the core and whether there is a film on it.

15–25 turns · 18 mm

Formwork face

Film faced sheet behind the concrete. The phenolic film is what lets the sheet lift without the paste bonding to it, and the film is what the reuse count depends on.

See the board

9–25 mm · BB/CP or C/C

Structural sheathing and decking

The panel behind cladding, render and roofing, where it forms part of the racking resistance rather than just a surface.

See the board

BB/CP · Baltic · CNC

Furniture and joinery

Cross-banded veneers give a panel that stays flat and holds a screw at the edge — which is what a carcass actually needs.

See the board

C/C · 8–15 turns

Export packing and crating

A structural sheet that has to survive a container and a crane, where cost per square metre matters more than face grade.

See the board

Specification

How an order narrows down

Six lines, in the order they actually get decided. Send them and the answer comes back with a price rather than a question.

Line	Range	What decides it
Thickness	9–25 mm	Set by the span and the load, not by preference.
Sheet size	1220 × 2440 mm	Standard. Cut to size on request.
Face grade	BB/CP or C/C	Decides appearance. Does not change strength.
Core	Poplar, combic, eucalyptus	Decides weight and edge quality.
Emission	E0 or E1 (EN 717-1)	E1 is the standard interior grade.
Formwork standard	EN 13377	Applies to the system the sheet sits in.

On site

Where the sheet ends up

Four settings that between them cover most of what an export order is used for.

Formwork on site — film faced plywood deck before the pour — Formwork on site Props, bearers and a film faced deck before the pour.

Structural sheathing — plywood boards fixed to studs — Structural sheathing Board fixed to studs before the cladding goes on.

Joinery workshop — birch plywood with a visible ply edge — Joinery workshop Cut sheets and a CNC edge on a birch panel.

Loading — bundled plywood sheets into a 20ft container — Loading and crating Bundled sheets in a container, edge protection on.

The range

Eight board categories

Grades, bundles and loading rates are set per order. Sizes held in stock are listed on each category page.

Wood panels hub