E0 and E1 emission · 1220 × 2440 mm · 9–25 mm
Particle Board
- Size 1220 × 2440 mm, 2100 × 2800 mm, 1250 × 2500 mm, 1830 × 3660 mm, or cut to size
- Thickness 9–30 mm
PAR-8FFCE5
Get a Quote
E0 and E1 emission, 9–25 mm. Carcasses, back panels and flat-pack.
Narrow it down
Products
1220x2440mm
Flakeboard
- Size 1220 × 2440 mm, 2100 × 2800 mm, 1250 × 2500 mm, 1830 × 3660 mm, or cut to size
- Thickness 9–30 mm
PAR-A76B07
Get a Quote
Sizes we produce
| Parameter | Values |
|---|---|
| Size | 1220 × 2440 mm, 2100 × 2800 mm, 1250 × 2500 mm, 1830 × 3660 mm, or cut to size |
| Thickness | 9–30 mm |
| Emission | E0 and E1 grades — E1 is the standard interior grade, E0 the tighter of the two · E0 and E1 grades available; E1 is the standard interior grade, E0 the tighter of the two |
| Face | Calibrated flat face, ready for melamine paper, laminate or a veneer |
| Core | Wood chips and shavings bonded with adhesive |
| Material | Wood chips, shavings and particles · Wood flakes bonded with adhesive under pressure |
| Edge | Cut edges require an edge band or trim — the exposed core takes up moisture · Cut edges need an edge band or trim — the exposed core takes up moisture |
| Use | Carcasses, flat-pack furniture, back panels, shelving and interior fit-out · Shelving, loaded carcasses, packaging and areas that need more strength than a standard chipboard |
| Flake | Larger, oriented flakes than standard particle board — the reason it bends further before it fails |
| Strength | Higher bending strength than standard particle board, so it takes a longer shelf span |
Tolerances and densities vary by section profile. Send the drawing for the exact values on your order.
Related reading
Acoustic panel nrc rating explained: the complete guide for specifiers
If you are selecting acoustic panels for an office, studio, school, or commercial space, you have probably encountered the term NRC rating . But what does…
Read the guide
MDO Plywood vs Phenolic Plywood: An Engineer’s Comparison
In concrete formwork, MDO plywood and phenolic plywood are the two most common engineered panel choices. Both offer excellent concrete finish, but their composition, performance, and…
Read the guide
H20 Beam vs Solid Timber Beam for Concrete Formwork
In concrete formwork systems, the choice between H20 timber beams and solid timber beams is critical for project cost, speed, and quality. While both have been…
Read the guideOther categories
Need a spec sheet or sample for Particle Board?
Tell us the profile, the length and the quantity. We will confirm what is in stock and what is made to order.