SPC flooring
Click-lock rigid core with an IXPE pad underfoot. It goes over an existing subfloor with no adhesive and no cure time.
Learn more SPC flooring
15-25
days production lead time
Class B
fire performance options
0
formaldehyde emission
1×20ft
container MOQ
What goes into this job
Materials and where each one is used
Wall panel
Corridor and lift-lobby walls take the most traffic. The wipe-clean surface is the reason to specify panel over painted board.
Learn more Wall panelFire-rated door skin
Guest-room doors need a skin that matches the rating of the door core, not only the colour.
Learn more Fire-rated door skinAcoustic ceiling
Corridors and lift lobbies are hard surfaces and reverberate. A rated panel brings the level down before it reaches the room.
Learn more Acoustic ceilingHow the job runs
Sequence on site
-
1
Fix the specification before the order
Fire rating, wear layer and emission class first. Changing any of them after the floor is laid is the expensive order to change.
-
2
Acclimate the flooring
Lay the boards in the room for the acclimation period the supplier states before clicking them down.
-
3
Start from a straight reference line
Measure once and chalk a line. The first row decides whether the last row lands square.
-
4
Lay the field
Stagger the end joints between rows. A continuous seam running down a corridor is the first thing a guest notices.
-
5
Fix wall panels before the final clean
Doing panels before the clean keeps adhesive dust out of the joints.
-
6
Hand over with the paperwork
Fire certificates, test reports and batch records belong in the handover pack.
On site
What this application looks like
Specified on this kind of job
Products used on this type of project
50 × 90 mm section · interior ceiling
Easy-install WPC Ceiling Tube 50 × 90 mm
- Section 50 × 90 mm, supplied made to order to the run length
- Install Easy-install detail — the profile seats onto its fixing in one movement
CEI-C7A5CE
Get a Quote
50 × 75 mm section · interior ceiling
Suspended WPC Ceiling Tube 50 × 75 mm
- Section 50 × 75 mm, supplied made to order to the run length
- Suspension Suspended detail — hangs on hangers below the slab rather than fixing tight to it
CEI-3408AF
Get a Quote
25 × 100 mm section · interior ceiling
Decorative WPC Ceiling Tube 25 × 100 mm
- Section 25 × 100 mm, supplied made to order to the run length
- Visual weight Wide face at shallow depth — a broad beam line without dropping the ceiling much
CEI-E4FB23
Get a Quote
25 × 80 mm section · interior ceiling
Flame-retardant WPC Ceiling Tube 25 × 80 mm
- Section 25 × 80 mm, supplied made to order to the run length
- Fire Class B option available on this section — confirm the class the project requires
CEI-65FF75
Get a Quote
209 × 15 mm section · interior wall
Wave Wood-grain WPC Wall Panel 209mm
- Face width 209 × 15 mm, supplied made to order to the wall length
- Pattern Wave wood-grain — the grain follows the wave rather than running straight
WPC-FB4675
Get a Quote
Interior wall
Clip-on Easy-install WPC Wall Panel
- Fixing Concealed clip — panels seat by hand, no visible screws and no adhesive
- Section Face width to the drawing — the clip-on profile is made to order to the run
WPC-9B0BC5
Get a Quote
Technical notes
Detail worth knowing before you order
Hospitality fit-out is a repeatability problem: hundreds of identical rooms, a tight programme, and a specification the operator can afford across the whole estate. Send one room’s detail and we will quote the volume behind it.
We supply to hotel groups and to their contractors. Where the operator specifies a particular finish, we will confirm whether that finish is a stock item or a minimum-order quantity.
Other applications
Tell us about your project
Area, substrate, fire rating and target cost are enough for a first answer.