Acoustic panel nrc rating explained: the complete guide for specifiers
If you are selecting acoustic panels for an office, studio, school, or commercial space, you have probably encountered the term NRC rating . But what does…
Read the guideTechnical guides
The questions buyers actually ask
Each guide takes one decision — grade, rating, reuse count — and works it through with the standard and the cost attached.
All guides
MDO Plywood vs Phenolic Plywood: An Engineer’s Comparison
In concrete formwork, MDO plywood and phenolic plywood are the two most common engineered panel choices. Both offer excellent concrete finish, but their composition, performance, and…
Read the guide
H20 Beam vs Solid Timber Beam for Concrete Formwork
In concrete formwork systems, the choice between H20 timber beams and solid timber beams is critical for project cost, speed, and quality. While both have been…
Read the guide
Carb phase 2 explained: a complete compliance guide for composite wood importers
If you import plywood, MDF, particle board, OSB, or any composite wood product into the United States or California, you must comply with CARB Phase 2…
Read the guide
Osb2 vs osb3: the real difference explained for importers and contractors
OSB (Oriented Strand Board) is one of the most widely used engineered wood panels in modern construction. Yet many buyers are confused about the difference between…
Read the guide
SPC Flooring for Bathrooms: What Actually Happens Over Time
Bathrooms are the toughest test for any flooring. Water splash, humidity, dropped objects, and temperature changes push every floor to its limits. SPC flooring (Stone Plastic…
Read the guideDocuments
What you can download or ask us to send
Catalogue
Full product catalogue
Every product line with its sizes, thicknesses and the technical data.
Open
Samples
Request a sample box
Cut sections of the panel and board you are specifying, sent by courier.
Request
Certificates
Test reports and certificates
SGS reports, CE documentation and batch records on request for a specific order.
Ask
Standards
What the products are tested to
Named so you can check them against the specification rather than take our word for it.
- ASTM C423 Acoustic absorption The test behind every NRC figure we publish. Our grades are 0.70, 0.85 and 0.95.
- EN 13377 Prefabricated timber formwork Covers the H20 beam and the formwork system it belongs to. Section governs the load, not length.
- CARB Phase 2 Formaldehyde emission The US limit for composite wood. E0 and E1 grades are available on the board lines.
- SGS / CE Third-party testing Panel samples are tested by SGS. CE documentation is supplied with EU-bound orders.