4 mm and 5.5 mm rigid core · click-lock · IXPE pad
Click-lock SPC Flooring
- Thickness 4 mm and 5.5 mm rigid core
- Edge Click-lock — the plank joins to its neighbour and locks without adhesive
SPC-C17D57
Get a Quote
Commercial SPC Flooring 6mm
SKU: SPC-B1E023
SGS tested
CE marked
ISO 9001
Specification
| Thickness | 6 mm — this product is the 6 mm core only |
|---|---|
| Wear layer | 0.5 mm — the heavy layer, for commercial traffic |
| Edge | Click-lock, with the joint detailed for repeated cleaning |
| Use | Shops, offices, reception areas and other commercial floors |
| Point load | The thicker core spreads a trolley wheel or a chair leg better than a 4 mm core |
| Material | Rigid mineral core of PVC and calcium carbonate with stabilisers |
| Installation | Floating over a flat and dry subfloor |
| Standard | SGS tested. CE documentation supplied with EU-bound orders. |
What this product does
-
1
Single 6 mm core
One thickness only, chosen for commercial floors
-
2
0.5 mm wear layer
The heavy layer, for abrasion from footfall and cleaning
-
3
Point load spread
A thicker core spreads a trolley wheel better than a 4 mm plank
-
4
Click-lock, floating
Laid floating over a flat and dry subfloor
Description
A 6 mm rigid-core SPC plank with a 0.5 mm wear layer, built for commercial floors. The thickness and the wear layer are both deliberate: the core carries the point load and the wear layer takes the abrasion.
It goes in shops, offices, reception areas and other commercial interiors, where a domestic plank would be asked to do more than it was made for. The 6 mm core spreads a trolley wheel or a chair leg over more material, so the floor resists marking, and the 0.5 mm wear layer is the heavy end of the range, which is what decides how long the surface survives cleaning and footfall. A loaded pallet truck on a small wheel is a different load case again, and if that is the actual traffic the floor needs a different specification rather than a thicker plank. The plank is click-lock and laid floating over a flat, dry subfloor, which keeps installation clean and lets the floor move as a sheet. It can go over an existing commercial floor if that floor is sound and flat, but the height at the thresholds should be checked before the order.
Confirm the traffic type and the subfloor condition when you enquire, because a commercial specification written for footfall and one written for wheeled loads are not the same floor.
Where it is used
Shops and showrooms
Trolleys, footfall and cleaning all arrive on the same floor
Office reception and circulation
The floor where chairs roll and people stop to talk
Hotel public areas
Lobbies and function spaces that take continuous traffic
Restaurants and cafés
Chairs moved daily and spills wiped up on the same surface
Frequently asked
What is the minimum order?
1 × 20ft container, mixed across products where the mix suits the project. A sample box can be arranged before the first container.
Can I see a sample before ordering?
Yes. Send the product and the size you are specifying, and we will confirm the sample and the lead time for it.
Will a trolley wheel mark a 6 mm commercial SPC?
A 6 mm core with a 0.5 mm wear layer spreads a point load better than a thin domestic plank, so it resists marking under normal trolley traffic. It is not indestructible: a loaded pallet truck on a small wheel is a different load case, and if that is the traffic the floor needs a different specification.
Why 6 mm rather than 5.5 mm?
The extra 0.5 mm of core is what lets the plank carry commercial traffic and stay flat over a subfloor with minor variation. It also gives a slightly quieter, more solid feel underfoot.
Does the wear layer matter more than the thickness?
Both matter, and they do different jobs. The wear layer decides how long the surface survives abrasion; the core thickness decides how the plank behaves under a point load. A commercial floor needs both.
Can it be laid over an existing commercial floor?
Over a sound, flat one, yes, with the same flatness checks as any floating floor. Confirm the height at the thresholds first.
Trade terms
- MOQ
- 1 × 20ft container
- Lead time
- 15-25 days
- Payment terms
- T/T 30% deposit, balance before shipment
Final packing, freight and loading plan are confirmed in writing on the order quotation.
Related products
All in this category
Loose Lay SPC Flooring
- Thickness Core thickness selected to the traffic — loose-lay format, confirmed at quotation
- Edge Loose lay — no click, no adhesive; the plank holds by friction and weight
SPC-B4F68A
Get a Quote
Self-adhesive SPC Flooring
- Thickness Core thickness selected to the traffic — self-adhesive format, confirmed at quotation
- Backing Peel-and-stick adhesive backing, factory applied
SPC-EB4572
Get a Quote
IXPE Padded SPC Flooring
- Backing IXPE foam factory-bonded to the plank — not a separate underlay
- Acoustic The bonded pad takes the hollow sound out of a floating floor
SPC-157802
Get a Quote
50 × 150 mm section · interior ceiling
Ventilated WPC Ceiling Tube 50 × 150 mm
- Section 50 × 150 mm, supplied made to order to the run length
- Weight class Heaviest tube in the range — the hanger carries the section, so it fixes back to structure
CEI-7F162E
Get a Quote
50 × 90 mm section · interior ceiling
Easy-install WPC Ceiling Tube 50 × 90 mm
- Section 50 × 90 mm, supplied made to order to the run length
- Install Easy-install detail — the profile seats onto its fixing in one movement
CEI-C7A5CE
Get a Quote
Technical reading
- 50+ Countries shipped to
- 2003 Established
- 20,000 m² factory area
- 20 Production lines
- 80 Employees
- 15 Product lines
- 5M m² annual capacity
Ask about this product
Tell us the size, the quantity and the destination port. We will come back with price, lead time and the packing plan.
- Reply within one business day
- No obligation, no account needed
- Drawings and specs stay confidential
Get My Quote
The product name and SKU are filled in for you.