169x24mm
3D Fluted WPC Wall Panel
- Section 169 × 24 mm, supplied made to order to the wall length
- Fluting Three-dimensional relief cut into the face to the full section depth — not a printed line
WPC-15ED72
Get a Quote
Low-maintenance WPC Wall Panel 167mm
167 × 24 mm section · interior wall
SKU: WPC-05F7E8
SGS tested
CE marked
ISO 9001
Specification
| Section | 167 × 24 mm, supplied made to order to the wall length |
|---|---|
| Profile | Deep grooved face — a 24 mm section gives a pronounced shadow line at the joint |
| Finish | Factory surface: no paint cycle, no oiling, no sanding between tenants |
| Limit | Low-maintenance is not damage-proof; a deep scratch that goes through the surface stays visible |
| Use | Commercial interiors where the finish will not be revisited between occupants |
| Standard | SGS tested. CE documentation supplied with EU-bound orders. |
| Maintenance | Wipe clean. No paint or oil finish required. |
What this product does
-
1
Factory finish
The surface is made at the factory, so there is no paint cycle to re-run
-
2
Deep 24 mm shadow line
A pronounced line at the joint rather than a fine one
-
3
No redecoration
No sanding or filling between occupants, which is the cost being avoided
-
4
Neutral cleaner only
A damp cloth and a neutral cleaner; no abrasive or solvent needed
Description
A wood-plastic composite wall panel at 167 × 24 mm with a deep grooved face. The 24 mm section is what gives it a pronounced shadow line at the joint, so the wall reads as panelled rather than as a flat sheet.
Its case is maintenance rather than decoration. The surface is a factory finish, not a coating that has to be renewed: there is no paint cycle, no oiling and no sanding between occupants, and cleaning is a damp cloth with a neutral cleaner. That matters in commercial interiors where nobody is going to come back and redecorate — a painted wall needs a redecoration cycle, a plaster wall needs repair after each tenant, and this needs neither. The comparison only works if the redecoration cost over the life of the fit-out is counted rather than the first cost. Being clear about the limit: low-maintenance is not damage-proof, and a deep scratch that goes through the surface stays visible. Panels fix to battens with the joint closing into the profile.
Confirm the wall area and the batten layout when ordering, and take a sample of the actual finish, because the low-maintenance argument only holds if the colour is right first time.
Where it is used
Serviced apartment corridors
The fit-out is not revisited between tenancies, so the finish has to hold
Student accommodation
High turnover, low maintenance budget, and nobody to redecorate in summer
Back-of-house offices
Rooms that are functional and will not be refurbished
Clinic and surgery corridors
A wipe-clean wall that meets an infection-control routine
Frequently asked
What is the minimum order?
1 × 20ft container, mixed across products where the mix suits the project. A sample box can be arranged before the first container.
Can I see a sample before ordering?
Yes. Send the product and the size you are specifying, and we will confirm the sample and the lead time for it.
What does low-maintenance actually mean here?
That the finish is a factory surface, not a coating that needs re-doing. There is no paint cycle, no oiling and no sanding between tenants. Cleaning is a damp cloth. What it does not mean is damage-proof: a deep scratch stays visible.
Is it suitable where nobody looks after the building?
That is the case it is built for. A painted wall needs a redecoration cycle and a plaster wall needs repair between occupants; this needs neither. The cost comparison only works if you count the redecoration over the life of the fit-out, not the first cost.
How does the 24 mm section read on a wall?
The 24 mm depth gives a deeper shadow line at the joint than the 10 mm or 15 mm sections, so the wall reads as panelled rather than flat. On a long corridor that is usually the intent.
Can it be cleaned with a standard commercial cleaner?
A neutral cleaner and a damp cloth are enough. Avoid abrasives and solvents, which dull the surface without cleaning it any better.
Trade terms
- MOQ
- 1 × 20ft container
- Lead time
- 15-25 days
- Payment terms
- T/T 30% deposit, balance before shipment
Final packing, freight and loading plan are confirmed in writing on the order quotation.
Related products
All in this category
169x24mm
Solid Plain WPC Wall Panel
- Section 169 × 24 mm, flat face, supplied made to order to the wall length
- Face Unbroken — no groove line to hold dust and no pattern to line up
WPC-048221
Get a Quote
169x24mm
Co-extruded WPC Wall Panel
- Section 169 × 24 mm, co-extruded, supplied made to order to the wall length
- Skin A separate outer layer bonded during extrusion, not laminated on afterwards
WPC-B754FF
Get a Quote
169x24mm
Anti-mould Groove WPC Wall Panel
- Section 169 × 24 mm, grooved, supplied made to order to the wall length
- Compound Anti-mould additive carried in the compound, not applied as a surface coating
WPC-11FA10
Get a Quote
169x24mm
Exterior Co-extruded WPC Wall Panel
- Section 169 × 24 mm, exterior co-extruded, supplied made to order
- Skin UV-stabilised cap, formulated for sunlight rather than interior wear
WPC-A66F78
Get a Quote
84 × 8 mm section · interior wall
Mildew-resistant WPC Wall Panel 84mm
- Section 84 × 8 mm narrow board, supplied made to order to the wall length
- Joint count Roughly twice as many joints per metre as a 169 mm board — set out from a centre line
WPC-125779
Get a Quote
Technical reading
- 50+ Countries shipped to
- 2003 Established
- 20,000 m² factory area
- 20 Production lines
- 80 Employees
- 15 Product lines
- 5M m² annual capacity
Ask about this product
Tell us the size, the quantity and the destination port. We will come back with price, lead time and the packing plan.
- Reply within one business day
- No obligation, no account needed
- Drawings and specs stay confidential
Get My Quote
The product name and SKU are filled in for you.